Find Ip Address For Mac



Learning has never been so easy!

How to find an IP address when you have the MAC address of the device.

Find your computer’s name and network address on Mac. If other people want to locate your Mac on the network, they need to know your computer’s name or network address. Your Mac has several identifiers that people may look for on the network: computer name, local hostname (or local network name), and network address. MAC addresses are used in the local network while IP addresses can be used to identify network devices all around the world. Method 1: How to Find Your MAC Address in Windows 10 with Command Prompt.

4 Steps total

Step 1: Open the command prompt

Click the Windows 'Start' button and select 'Run.' In the textbox, type 'cmd' and click the 'Ok' button. This opens a DOS prompt.

Step 2: Familiarize yourself with arp

Type 'arp' in the command prompt. This gives you a list of options to use with the arp command.

Step 3: List all MAC addresses

Type 'arp -a' in the command prompt. This lists a number of MAC addresses with the associated IP addresses. Since you have the MAC address, scroll down the list to find the associated IP address. The MAC address is shown in the 'Physical Address' column with the IP address in the 'Internet Address' column. An example of a table record is in Step 4.

Step 4: Evaluate results

The following is an example of ARP output. The first column is the IP address. The second column is the MAC address, and the third is the type of IP assigned--static or dynamic.

Internet address Physical Address Type

192.168.0.1 01-a3-56-b5-ff-22 static

Published: Jan 21, 2013 · Last Updated: Aug 03, 2017

References

Mashable

Mac
  • How to Use a MAC Address to Find an IP Address

16 Comments

  • Datil
    Krizz Jan 21, 2013 at 10:36pm

    You've forgotten about one little thing: arp keeps mac<>ip association of recently contacted peers, so it's quite often not to find the mac<>ip association we're looking for, of machine that exists in the network. Prior to using arp -a it's wise to ping the host first.

  • Habanero
    Twon of An Jan 21, 2013 at 11:24pm

    Used in conjunction with ping (thanks Krizz), this is a good basic walk through. I can't go wrong with these steps!

  • Cayenne
    Syldra Jan 22, 2013 at 03:17pm

    I'm sorry but... if the thing is to find the IP address from the MAC, how will you ping the host first ?

  • Serrano
    Enzeder Jan 22, 2013 at 04:37pm

    I thought the aim of this exercise was to FIND an IP address. Doesn't using PING imply you already know the IP (or hostname) which makes ARP redundant? How do you PING a MAC?

    Assuming no IP or hostname info, I have used a portscanner (like LanSpy or Zenmap) to get MAC > IP info. Currently my preferred method if the device isn't listed in Spiceworks :-)

    There was a time when I was a baby admin and I didn't want to raise alarms by installing a scanner that I wrote a batch file (yes, that long ago) that PINGed every IP on a subnet, then immediately ran ARP redirecting output to a text file. But that depends on the device in question being set to respond to PING requests.

  • Pimiento
    christian.mcghee Dec 23, 2013 at 03:47am

    This does not work for any host on the other side of a router. Any hosts on the other side of the router will show the routers MAC address.

  • Serrano
    @Greg Mar 11, 2014 at 03:11pm

    I realize this is an old topic, but someone like myself may be looking for an answer. I became admin of a network with little over 200 devices, which none of the cabling was mapped. I was told I was responsible for the cabling, so I began looking for a way other than toning out all the cables. I was fortunate to have Cisco switches and Windows Server 2008. I was able to use the Cisco Network Assistant to grab MAC addresses and the port number, then in DHCP on the Server 2008 I could find the MAC and corresponding IP. Furthermore I could also get the computer name from DHCP and correlate that to which user was on the machine using PDQ inventory to see who was logged in to the machine. Most of this of course depends on the devices being in use. I've been able to create an accurate map of about 90% of my network without touching the cables.

  • Pimiento
    christopherblouch Jun 4, 2014 at 05:08pm

    I am interested in this thread, hopefully someone can help. There are 4 types of arp message: arp request, arp reply, rarp request, rarp reply. So, that being said, is it possible to manually send a rarp request? Sort of a arp based ping?There is arping, but we need rarping... if it exists. Of course, I understand that I can't arp outside my default gateway, but if there is a rarp request, how is it used inside the local network? Thanks to whatever guru can explain what we're missing.

  • Serrano
    Maxwell Brotherwood Jul 18, 2014 at 10:07am

    Great for finding an IP if you have the MAC address.

    My instance where I found this useful was after updating the firmware on a switch remotely via TFTP, the IP of the switch would change (making pinging redundant, obviously). Trying a network scan over Spiceworks or rescanning the single device would not update the IP and I needed an alternate way to find it.

    This method worked perfectly. Thank you. Hopefully this helps those trying to understand the purpose of this practice and how it was in-fact useful.

  • Pimiento
    robertrobinson2 Aug 4, 2014 at 04:30pm

    I understand the issues in attempting to use a MAC address to locate a device from outside of its local network.
    What puzzles me is how Honeywell Total Connect does this with their WiFi connected thermostats. The hardware configuration is: a Honeywell WiFi thermostat that is WiFi connected to a Netgear N600 router which uses DHCP to assign an IP adddress. The router is connected to Comcast with a Motorola SB6120 modem. Comcast assigns a system wide (dynamic) IP. There is no static IP.
    On initial setup, a WiFi connection is first established between the thermostat and the router. The thermostat's MAC and CRC and a username and password are entered into the Total Connect software setup. It is then possible to read or set thermostat values using Total Connect Web pages.
    I know how to do this with a static IP or a DNS service that automatically tracks changes in dynamic IP addresses.
    Does anyone understand how this works with Total Connect?

  • Tabasco
    Joe979 Sep 4, 2014 at 01:05pm

    This post was extremely helpful, thanks itdownsouth :) I used show interface to find MAC addresses on our switches (reason for this is poor network documentation and mis-labeled switchports and wall jacks...). I took the MAC addresses that I could not locate the hosts or ip addresses for, ran arp -a to list the address<>mac list, then one by one, nbtstat -A for each IP address I matched a MAC to from the unlabeled ports. Tedious, but found 5 or 6 now (seeing hexadecimal thoughts now though...).

  • Tabasco
    Joe979 Sep 4, 2014 at 01:12pm

    By the way, the reason this is working great for me is the lack of routers -- all switches, so if you have only one subnet like we do, this will do -- otherwise, you will probably need to login to the router or switch on the other side of the router to find MAC address tables on the other networks. You may not be able to see them all on the local host, as far as arp -a on the local host, but looking up the arp or hosts tables on switches and routers could be a possible solution for those with multiple subnets.

  • Jalapeno
    Jay196 Oct 21, 2014 at 03:28pm

    Use SuperScan to do a bulk ping of the entire network range. SuperScan 3 (I recommend) is a free tool by McAfee.

    Then use arp -a | Find '5c-d9-98' to get for example all ping nodes with a manufacturer of Asus.

  • Datil
    WealthyEmu Mar 25, 2015 at 07:55pm

    There's also this:

    http://www.advanced-ip-scanner.com/

    It should be able to find most devices on the network. You can specify the range to scan and scan across subnets. I won't try to share all the features because quite frankly I don't know them all.

  • Pimiento
    amiruli Jul 4, 2015 at 10:18am

    If you want you can ping the broadcast address to ping everyone on the network then do arp -a

  • Pimiento
    chrisdahlkvist Nov 23, 2015 at 09:56am

    @RobertRobinson I'm the lead designer and project manager on the Honeywell systems.

    I can tell you exactly how I designed it. It's actually quite simple. Nothing is sent back to the unit. The unit is allowed access to the Internet via your setup and the router. As long as the unit has permission to make an outbound connection it will work. What happens is the unit makes a report to the server. If it needs to make a request then it gives the server a unique key. The server puts any needed data in an xml (readable) and the thermostat (or quite a few other devices) hits that URL a few seconds later (the device told the server where it would pick up that info).

    All your device needs is a simple read-only connection to the outside world. No need to download anything.
    It's a VERY simple process that I developed back in 1992 when the Interwebs were still pretty new to most people. There were many processes built off of this simple idea (it was pretty cutting edge when I first designed it). Store and forward, offline browsing, push technology, etc. all are based on this simple technology.

    Am I rich? Not even close. I was working on my PhD at the time and was hired by Honeywell to implement my design. I literally gave it away to the general public as is right.

    I hope that clears it up for you. If not, feel free to contact me for more information.

    Chris Dahlkvist
    chris@usarf.org

  • prev
  • 1
  • 2
  • next
How to find the IP address of your internet router using a Mac, PC, iPhone, or AndroidBusiness Insider via Yahoo News4 months ago

It is important to know your printer’s IP address if you want to connect it to your network or troubleshoot any problems. Your printer’s IP address is kind of like its street addresses. Without it, you can’t send your printer any print jobs or give it any other commands. Here’s how to find your printer’s IP address on a Mac or Windows PC.

How To Find Your Printer’s IP Address From Your Router

It doesn’t matter if you are using aMac or a PC, you can find your printer’s IP address by accessing yourrouter.

  1. Type your router’s local IP address into the address bar of any web browser.
  2. Enter your username and password.
  3. Your printer’s IP address will be under the list of devices connected to the network.

Note: The information will be listed differently depending on your router’s set-up page. Check for words like network map, connected device list, network topology, or other similar terms.

How To Find Your Printer’s IP address in Windows 10

There are a couple of ways to printyour IP address from a Windows 10 desktop or laptop. The easiest way is byfinding it in the Control Panel. Here’s how:

  1. Type “control panel” in the search box. This is the button with the magnifying glass near the Start menu in the bottom-left corner of your screen.
  2. Click on Devices and Printers.
  3. Right-click on a printer and select Properties.
  4. Select the Web Services tab. The IP address should be located at the bottom of Device Information and Troubleshooting Information panels.

If you can’t find your printer in the control panel, you can do a more intensive search by using the Command Prompt. Here’s how:

How To Find Your Printer’s IP Address with Command Prompt

  1. Type cmd in the search box near the Start menu.
  2. Type ipconfig in the command line, then press Enter.
  3. Find your IPv4 address.
  4. In a new command line type ping followed by a space and then your IPv4 address.
  5. Then hit Enter.
  6. After the results load, type arp -a and hit Enter. All dynamic and static connections using the IPv4 address will load.

    Note: If you know your printer’s MAC address or physical address, the internet address which appears beside it will be your printer’s IP address. This 12-digit number can be usually found on the printer or in the printer’s manual.

  7. Open any web browser. You can use Chrome, Firefox, Edge, or any other web browser of your choice.
  8. Copy-paste the dynamic IP address that you got from the arp command. If many addresses appear, paste each address on a different tab.
  9. If the IP opens a printer setup page, that would be your printer’s IP address. The webpage will have the manufacturer’s logo and will display printer information, like the printer status and how much ink you have.

How To Find Your Printer’s IP Address on a Mac

There are two easy ways for you tofind your printer IP address on your Mac desktop or laptop. First, you can findit under System Preferences. You could also find it online using Common UnixPrinting System (CUPS), an open-source printing system for Apple and UNIXdevices.

How To Find Your Printer’s IP Address from System Preferences

  1. Open System Preferences. You can find this in your dock or by going to the Apple logo in the top-left corner of your screen and selecting System Preferences.
  2. Click on Printers and Scanners.
  3. Select a printer from the left column. If you have more than one printer in your network, they will be displayed in a list on the right-hand side of the Print & Scan menu.
  4. Your printer’s IP address will be under Location.

How To Find An IP Address For A Known MAC Address In Windows

How To Find Your Printer’s IP Address Using the CUPS Webpage

  1. Open your Applications folder.
  2. Then open Utilities.
  3. Next, open Terminal. Â
  4. Type cupsctl WebInterface=yes and press Enter on your keyboard. The CUPS web interface will be enabled.Â
  5. Open Safari.
  6. Type localhost:631/printers into the address bar.
  7. Your printer’s IP address will be in the Location column.

Now that you know how to find your printer’s IP address, the next step is to learn how to add your printer on Mac or Windows 10 desktop or laptop.

How to Find Your Printer’s IP Address Fromthe Network Configuration Page

Find Ip Address For Mac Address Linux

Almost all printers can print out anetwork configuration page, which will include the printer’s IP address.

If your printer has a user interface(UI) display, the configuration page can generally be printed by going to theSettings or Setup page. Again, the exact steps will vary for differentprinter makes and models.

Find Ip Address For Mac

For example, on an HP LaserJet ProM1212n, you would need to go to the Set-up > Reports > Reports Demo Page >Config Report to print the configuration page.

On the other hand, for CanonimageRUNNER printers, you would need to go to the Main Menu > Settings > Preferences> Network to print out a report. Check your device manual on the exact stepsto follow.

For models without a user interface display, you will need to press and hold a certain button (usually this button is labeled as Power, Go, or in some cases, the Wi-Fi button) for five to 10 seconds to print a configuration page. It’s best to check the printer manual on how you can do this.

Now that you know how to find your printer’s IP address, the next step is to learn how to add your printer on Mac or Windows 10 computer.

Updated on March 27, 2020

Find Ip Address For Mac

Was this article helpful?

Mac To Ip Address Lookup

Related Articles